Air Regulator
Product Description
| Feature | Value |
| Model | AR-MD |
| Size | 1/4″, 3/8″, 1/2″ |
| Body |
Aluminium Pressure Die Cast
|
| Seals | Hi-Nitrile |
| Bowl |
Polycarbonate (Metal Bowl Available)
|
| Element | 25 Micron |
| Pressure | Up to 10 Kg/cm² |
| Temperature | Up to 50°C |
| Media | Compressed Air |
RELATED PRODUCTS
2 /2 Way Pneumatic Single & Double Acting Angle Type On/Off Control Valve
Body : Aluminium / S.S.304
Actuator Type : Double Acting / Single Acting
Air Connection : 1/4″ BSP (NPT On Request)
Operating Pressure : 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4″)
Operating Cycles : 350 to 650 Cycles / Hr.
Model : SRT / ASV / SRK / TOF
Size Range : 1/2″ to 4″
Body : CF8 / CF8M / CF3M
Bonnet : CF8 / CF8M / CF3M
Pressure : up to 10 Bar
Temperature : up to 220°C
Leakage : As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight
End Connection : Screwed End / Flanged End
Actuator Ball valve
| Model | ECO |
| Body |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
|
| Size Range | 1.1/2" to 48" |
| Shaft |
AISI 410 / AISI 304 / AISI 316 / AISI 316L
|
| Disc. |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
|
| Seat |
Nitrile / EPDM / Viton / Hypelon / Neoprene
|
| Seat Leakage | Tight Shut Off |
| Temprature |
-20°C to 80°C (High Temperature available on Request)
|
| Pressure rating |
PN 10 / PN 16 ( PN 20 ON REQUEST)
|
| End Connection |
Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)
|
Diaphragm Solenoid Valve
Model : ISD
Body : CF8 / CF8M
Size Range : 1/4" to 6"
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : "F" Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End
RMS Model Heavy Duty Pneumatic Cylinder
| Bore (mm) | 125 l 150 l 200 l 250 l 300 l 350 l 400 l 450 |
| Piston Rod | 032 l 032 l 038 l 051 l 051 l 056 l 056 l 070 |
| Stroke | Up to 2500mm |
| Seals | Buna - N / P.U. / Hi - Nitril (Viton on Request) |
| Pressure | Up to 12 kg/cm² |
| Temperature | 80°C / 100°C / 180°C Max. |
| Tube | Stainless Steel / M.S. Tube (M.S. Seamless Tube with Hard Chrome Plated ) |
| End Cover | C.I. |
| Mounting | Center Trunnion Mounting, Pivot Mounting, Eye Rod Mounting, Fork Mounting, Center Lug Mounting, Center Trunnion Mounting (Adjustable), Pivot Bracket & Pin Mounting, Flange Mounting, Front/Rear Trunnion Mounting (Fixed), Front/Rear Fixed Trunnion Mounting Top, Foot Bracket Mounting, Center Trunnion Mounting (Adjustable) |
Reviews
There are no reviews yet.