Air Lubricator

Product Description

Feature	Value
Model	AL-MD
Size	1/4″, 3/8″, 1/2″
Body	Aluminium Pressure Die Cast
Seals	Hi-Nitrile
Bowl	Polycarbonate (Metal Bowl Available)
Element	25 Micron
Pressure	Up to 10 Kg/cm²
Temperature	Up to 50°C
Media	Compressed Air

Categories: FRL, MIDI Series, Pneumatics

There are no reviews yet.

Be the first to review “Air Lubricator”

Body : Aluminium / S.S.304

Actuator Type : Double Acting / Single Acting

Air Connection : 1/4″ BSP (NPT On Request)

Operating Pressure : 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4″)

Operating Cycles : 350 to 650 Cycles / Hr.

Model : SRT / ASV / SRK / TOF

Size Range : 1/2″ to 4″

Body : CF8 / CF8M / CF3M

Bonnet : CF8 / CF8M / CF3M

Pressure : up to 10 Bar

Temperature : up to 220°C

Leakage : As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight

End Connection : Screwed End / Flanged End

Model	2ADSS-5
Size	1/4”, 1/2”
Body	Aluminium Anodized
Seals	Nitrile
Pressure	1 to 10 Kg/Cm²
Temperature	5 to 55°C
Leakage	Bubble Tight
Media	Compressed Air (Filtered & Lubricated)
Coil Volt	12V, 24V, 48V, 110V, 230V, (AC / DC)
Duty Cycle	Continues Rated
Protection	IP 65 Class F
Connector	DIN 43650 B

Model	ADF-695
Body	IC SS
Connection Port	1/2" (F) (BSP)
Mounting	Indoor/Outdoor Better with cover Panel
Coil Volt	230v AC/DC
Critical Ambient Temperature	20°C to 85°C
Humidity Condition	less then 85%, IP 65
Off Time	0.5 to 45 Min.
On Time	0.5 to 10 Sec.
Manual Override	Reset
Timer Body	Electrical (Adjustable)
Note	Coil Volt 110v,24v, 12vAC/DC Available On Request

Bore (mm)	25
Piston Rod	10
Stroke	25mm to 1000mm (Up to 2000mm)
Seals	Buna-N / P.U. / Hi-Nitril (Viton on Request)
Pressure	0.5~10 kg/cm²
Temperature	80°C / 100°C / 180°C Max.
Tube	Aluminium Hard Anodized
End Cover	Aluminium Pressure Die Cast
Mounting	Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)