Wafer Butterfly Valve
Product Description
- Model : ECO
- Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
- Size Range : 1.1/2″ to 48″
- Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
- Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
- Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
- Seat Leakage : Tight Shut Off
- Temprature : -20°C to 80°C (High Temperature available on Request)
- Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
- End Connection : Wafer Type Suit 150#, Table ‘D’, ‘E’ & IS 6392 Table 11 (PN 10 / PN 16)
We Serve Pneumatic Actuator Wafer Type Butterfly Valve in many Countries like Malaysia, Tanzania, Africa, Oman, Egypt, and many more.
We have a wide range of Pneumatic Actuator Operated Wafer Type Butterfly Valve with Excellent Features like -20°C to 80°C Temperature and PN 10 / PN 16 Pressure Rating also provide PN 20 as per customer request.
Our Pneumatic Actuator Wafer Type Butterfly Valve also know only Wafer type Butterfly Valve in Valve Market.
RELATED PRODUCTS
2 /2 Way Pneumatic Single & Double Acting Angle Type On/Off Control Valve
Body : Aluminium / S.S.304
Actuator Type : Double Acting / Single Acting
Air Connection : 1/4″ BSP (NPT On Request)
Operating Pressure : 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4″)
Operating Cycles : 350 to 650 Cycles / Hr.
Model : SRT / ASV / SRK / TOF
Size Range : 1/2″ to 4″
Body : CF8 / CF8M / CF3M
Bonnet : CF8 / CF8M / CF3M
Pressure : up to 10 Bar
Temperature : up to 220°C
Leakage : As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight
End Connection : Screwed End / Flanged End
Diaphragm Solenoid Valve
Model : ISD
Body : CF8 / CF8M
Size Range : 1/4" to 6"
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : "F" Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End
FMK Model K-05 Series
| Bore (mm) | 25 |
| Piston Rod | 10 |
| Stroke |
25mm to 1000mm (Up to 2000mm)
|
| Seals |
Buna-N / P.U. / Hi-Nitril (Viton on Request)
|
| Pressure | 0.5~10 kg/cm² |
| Temperature |
80°C / 100°C / 180°C Max.
|
| Tube |
Aluminium Hard Anodized
|
| End Cover |
Aluminium Pressure Die Cast
|
| Mounting |
Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)
|
Reviews
There are no reviews yet.