5/3 Way Solenoid Valve
Product Description
| Model | 3ADDS-5 |
|---|---|
| Size | 1/4”,1/2” |
| Body | Aluminium Anodized |
| Seals | Nitrile |
| Pressure | 1 to 10 Kg/Cm² |
| Temperature | 5 to 55°C |
| Leakage | Bubble Tight |
| Media | Compressed Air (Filtered & Lubricated) |
| Coil Volt | 12V, 24V, 48V, 110V, 230V, (AC / DC) |
| Duty Cycle | Continues Rated |
| Protection | IP 65 Class F |
| Connector | DIN 43650 B |
Categories: Direction Control Valve, Pneumatics
Be the first to review “5/3 Way Solenoid Valve” Cancel reply
RELATED PRODUCTS
3/2 Way Single Solenoid Valve
| Model | 2ADSS-3 |
|---|---|
| Size | 1/4”, 1/2” |
| Body | Aluminium Anodized |
| Seals | Nitrile |
| Pressure | 1 to 10 Kg/Cm² |
| Temperature | 5 to 55°C |
| Leakage | Bubble Tight |
| Media | Compressed Air (Filtered & Lubricated) |
| Coil Volt | 12V, 24V, 48V, 110V, 230V, (AC / DC) |
| Duty Cycle | Continues Rated |
| Protection | IP 65 Class F |
| Connector | DIN 43650 B |
Diaphragm Solenoid Valve
Model : ISD
Body : CF8 / CF8M
Size Range : 1/4" to 6"
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : "F" Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End
Wafer Butterfly Valve
- Model : ECO
- Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
- Size Range : 1.1/2" to 48"
- Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
- Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
- Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
- Seat Leakage : Tight Shut Off
- Temprature : -20°C to 80°C (High Temperature available on Request)
- Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
- End Connection : Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)

Reviews
There are no reviews yet.