Pilot Piston Steam & High Temperature Solenoid Valve
Product Description
Attribute | Details |
Model | HVS |
Body | CF8 / CF8M |
Size Range | 1/4″ to 4″ |
Piston |
S.S.304 / S.S.316
|
Seat | Viton |
Temperature | up to 180°C |
Pressure | 0.5 to 12 Bar |
Coil Voltage |
12V, 24V, 48V, 110V, 230V, AC/DC
|
Coil Insulation |
“H” Class Suitable up to 180°C
|
Coil Enclosure | IP 67 |
Coil Rating |
Continuous Rated
|
Media |
Hot Water, Steam, High Temperature Fluids
|
Ends |
Screwed End / Flanged End 150 Class / Triclover End
|
Categories: Pneumatics, Solenoid valve, Valve Automation
Be the first to review “Pilot Piston Steam & High Temperature Solenoid Valve” Cancel reply
RELATED PRODUCTS
3/2 Way Single Solenoid Valve
Model | 2ADSS-3 |
---|---|
Size | 1/4”, 1/2” |
Body | Aluminium Anodized |
Seals | Nitrile |
Pressure | 1 to 10 Kg/Cm² |
Temperature | 5 to 55°C |
Leakage | Bubble Tight |
Media | Compressed Air (Filtered & Lubricated) |
Coil Volt | 12V, 24V, 48V, 110V, 230V, (AC / DC) |
Duty Cycle | Continues Rated |
Protection | IP 65 Class F |
Connector | DIN 43650 B |
Electrical Auto Drain Valve
Model | ADF-695 |
Body | IC SS |
Connection Port | 1/2" (F) (BSP) |
Mounting |
Indoor/Outdoor Better with cover Panel
|
Coil Volt | 230v AC/DC |
Critical Ambient Temperature | 20°C to 85°C |
Humidity Condition |
less then 85%, IP 65
|
Off Time | 0.5 to 45 Min. |
On Time | 0.5 to 10 Sec. |
Manual Override | Reset |
Timer Body |
Electrical (Adjustable)
|
Note |
Coil Volt 110v,24v, 12vAC/DC Available On Request
|
Wafer Butterfly Valve
- Model : ECO
- Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
- Size Range : 1.1/2" to 48"
- Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
- Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
- Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
- Seat Leakage : Tight Shut Off
- Temprature : -20°C to 80°C (High Temperature available on Request)
- Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
- End Connection : Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)
Reviews
There are no reviews yet.