RMS Model Heavy Duty Pneumatic Cylinder

Product Description

Bore (mm)	125 l 150 l 200 l 250 l 300 l 350 l 400 l 450
Piston Rod	032 l 032 l 038 l 051 l 051 l 056 l 056 l 070
Stroke	Up to 2500mm
Seals	Buna – N / P.U. / Hi – Nitril (Viton on Request)
Pressure	Up to 12 kg/cm²
Temperature	80°C / 100°C / 180°C Max.
Tube	Stainless Steel / M.S. Tube (M.S. Seamless Tube with Hard Chrome Plated )
End Cover	C.I.
Mounting	Center Trunnion Mounting, Pivot Mounting, Eye Rod Mounting, Fork Mounting, Center Lug Mounting, Center Trunnion Mounting (Adjustable), Pivot Bracket & Pin Mounting, Flange Mounting, Front/Rear Trunnion Mounting (Fixed), Front/Rear Fixed Trunnion Mounting Top, Foot Bracket Mounting, Center Trunnion Mounting (Adjustable)

Categories: Pneumatic Cylinder, Pneumatics

There are no reviews yet.

Be the first to review “RMS Model Heavy Duty Pneumatic Cylinder”

Model	3ADDS-5
Size	1/4”,1/2”
Body	Aluminium Anodized
Seals	Nitrile
Pressure	1 to 10 Kg/Cm²
Temperature	5 to 55°C
Leakage	Bubble Tight
Media	Compressed Air (Filtered & Lubricated)
Coil Volt	12V, 24V, 48V, 110V, 230V, (AC / DC)
Duty Cycle	Continues Rated
Protection	IP 65 Class F
Connector	DIN 43650 B

Bore (mm)	25
Piston Rod	10
Stroke	25mm to 1000mm (Up to 2000mm)
Seals	Buna-N / P.U. / Hi-Nitril (Viton on Request)
Pressure	0.5~10 kg/cm²
Temperature	80°C / 100°C / 180°C Max.
Tube	Aluminium Hard Anodized
End Cover	Aluminium Pressure Die Cast
Mounting	Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)

Model : ECO
Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
Size Range : 1.1/2" to 48"
Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
Seat Leakage : Tight Shut Off
Temprature : -20°C to 80°C (High Temperature available on Request)
Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
End Connection : Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)