Showing 13–24 of 29 results

Air Fr+l Set

Feature Value
Model AFR+L-MD
Size 1/4", 3/8", 1/2"
Body
Aluminium Pressure Die Cast
Seals Hi-Nitrile
Bowl
Polycarbonate (Metal Bowl Available)
Element 25 Micron
Pressure Up to 10 Kg/cm²
Temperature Up to 50°C
Media Compressed Air

Air Lubricator

Feature Value
Model AL-MD
Size 1/4", 3/8", 1/2"
Body
Aluminium Pressure Die Cast
Seals Hi-Nitrile
Bowl
Polycarbonate (Metal Bowl Available)
Element 25 Micron
Pressure Up to 10 Kg/cm²
Temperature Up to 50°C
Media Compressed Air

Air Regulator

Feature Value
Model JHR
Size
1/4", 3/8", 1/2", 3/4", 1"
Body
Aluminium Pressure Die. Cast
Seals NBR
Pressure 10 Kg/cm²
Temperature 50°C
Media Compressed Air

Air Regulator

Feature Value
Model AR-MD
Size 1/4", 3/8", 1/2"
Body
Aluminium Pressure Die Cast
Seals Hi-Nitrile
Bowl
Polycarbonate (Metal Bowl Available)
Element 25 Micron
Pressure Up to 10 Kg/cm²
Temperature Up to 50°C
Media Compressed Air

Diaphragm Solenoid Valve

Model : ISD
Body : CF8 / CF8M
Size Range : 1/4" to 6"
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : "F" Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End

Electrical Auto Drain Valve

Model ADF-695
Body IC SS
Connection Port 1/2" (F) (BSP)
Mounting
Indoor/Outdoor Better with cover Panel
Coil Volt 230v AC/DC
Critical Ambient Temperature 20°C to 85°C
Humidity Condition
less then 85%, IP 65
Off Time 0.5 to 45 Min.
On Time 0.5 to 10 Sec.
Manual Override Reset
Timer Body
Electrical (Adjustable)
Note
Coil Volt 110v,24v, 12vAC/DC Available On Request

F + R + L Sets 3pc With Pressure Gauge

Feature Value
Model JHFRCLM
Size
1/4", 3/8", 1/2", 3/4", 1"
Body
Aluminium Pressure Die. Cast
Seals NBR
Pressure 10 Kg/cm²
Temperature 50°C
Media Compressed Air

F + R Combination With Pressure Gauge

Feature Value
Model JHFRC
Size
1/4", 3/8", 1/2", 3/4", 1"
Body
Aluminium Pressure Die. Cast
Element 25 Micron
Pressure 10 Kg/cm²
Temperature 50°C
Media Compressed Air

FMK Model K-05 Series

Bore (mm) 25
Piston Rod 10
Stroke
25mm to 1000mm (Up to 2000mm)
Seals
Buna-N / P.U. / Hi-Nitril (Viton on Request)
Pressure 0.5~10 kg/cm²
Temperature
80°C / 100°C / 180°C Max.
Tube
Aluminium Hard Anodized
End Cover
Aluminium Pressure Die Cast
Mounting
Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)

Fr + L Sets 2pc With Pressure Gauge

Feature Value
Model JHFRCLM
Size
1/4", 3/8", 1/2", 3/4", 1"
Body
Aluminium Pressure Die. Cast
Seals NBR
Pressure 10 Kg/cm²
Temperature 50°C
Media Compressed Air

Micro Limit Switch Box

Ambient Temperature -20°C ~ 80°C
Material
Aluminium Pressure Die Cast
Conduit Connection 1/2" NPT
Mounting Bracket
Namur VDI / VDE 3845, ISO 5211
Terminal 8 Points
Switch Range
AC 250V 3A, 125V 5A, DC 250V 0.2A, 125V 0.4A, 30V 4A
Enclosure Protection IP 67

Moisture Separator

Model COMBO
Size 1/4" & 1/2"
Body
Aluminum Press. Die Cast
Cartridge Imported S.S.
Working Pressure 10kg/cm²
Testing Pressure 12kg/cm²
Efficiency 99.99%
Service Life
3 to 5 Yrs. (Approx.)
Installation
Advisable at End Use Before FR
Drain
Manual Ball Valve in 1/2" Manual Push type Valve in 1/4"