Diaphragm Solenoid Valve
Product Description
Model : ISD
Body : CF8 / CF8M
Size Range : 1/4″ to 6″
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : “F” Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End
Aira Euro Automation is a prominent valve manufacturer in India and we, at Aira Euro, have a wide range of industrial valves including Diaphragm Solenoid Valves and we boast of providing quality products with low maintenance.
In this ISD model, Solenoid Valve Diaphragm is made from Nitrile and the body is made from CF8 / CF8M material. It is available in ¼” to 6” sizes with the Screwed end / Flanged End 150# class/tri-clover End Connections. It is made to sustain temperatures from -5°C to 85°C (can lead up to 120°C on demand) and 0.5 to 10 BAR pressure. Solenoid plays a very important role in this product and hence it is searched mostly by the name of the solenoid.
The Solenoid coil voltages are 12V, 24V, 48V, 110V, 230V AC/DC, and “F” class Coil Insulation with IP 67 Coil Encloser. This valve comes as a normally open and normally closed position valve. Air, Water, Light oil, Gas, Light Chemicals, etc are the medias suitable for this valve.
RELATED PRODUCTS
Actuator Ball valve
| Model | ECO |
| Body |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
|
| Size Range | 1.1/2" to 48" |
| Shaft |
AISI 410 / AISI 304 / AISI 316 / AISI 316L
|
| Disc. |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
|
| Seat |
Nitrile / EPDM / Viton / Hypelon / Neoprene
|
| Seat Leakage | Tight Shut Off |
| Temprature |
-20°C to 80°C (High Temperature available on Request)
|
| Pressure rating |
PN 10 / PN 16 ( PN 20 ON REQUEST)
|
| End Connection |
Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)
|
Electrical Auto Drain Valve
| Model | ADF-695 |
| Body | IC SS |
| Connection Port | 1/2" (F) (BSP) |
| Mounting |
Indoor/Outdoor Better with cover Panel
|
| Coil Volt | 230v AC/DC |
| Critical Ambient Temperature | 20°C to 85°C |
| Humidity Condition |
less then 85%, IP 65
|
| Off Time | 0.5 to 45 Min. |
| On Time | 0.5 to 10 Sec. |
| Manual Override | Reset |
| Timer Body |
Electrical (Adjustable)
|
| Note |
Coil Volt 110v,24v, 12vAC/DC Available On Request
|
FMK Model K-05 Series
| Bore (mm) | 25 |
| Piston Rod | 10 |
| Stroke |
25mm to 1000mm (Up to 2000mm)
|
| Seals |
Buna-N / P.U. / Hi-Nitril (Viton on Request)
|
| Pressure | 0.5~10 kg/cm² |
| Temperature |
80°C / 100°C / 180°C Max.
|
| Tube |
Aluminium Hard Anodized
|
| End Cover |
Aluminium Pressure Die Cast
|
| Mounting |
Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)
|
Wafer Butterfly Valve
- Model : ECO
- Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
- Size Range : 1.1/2" to 48"
- Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
- Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
- Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
- Seat Leakage : Tight Shut Off
- Temprature : -20°C to 80°C (High Temperature available on Request)
- Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
- End Connection : Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)
Reviews
There are no reviews yet.