Actuator Ball valve
Product Description
| Model | ECO |
| Body |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
|
| Size Range | 1.1/2″ to 48″ |
| Shaft |
AISI 410 / AISI 304 / AISI 316 / AISI 316L
|
| Disc. |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
|
| Seat |
Nitrile / EPDM / Viton / Hypelon / Neoprene
|
| Seat Leakage | Tight Shut Off |
| Temprature |
-20°C to 80°C (High Temperature available on Request)
|
| Pressure rating |
PN 10 / PN 16 ( PN 20 ON REQUEST)
|
| End Connection |
Wafer Type Suit 150#, Table ‘D’, ‘E’ & IS 6392 Table 11 (PN 10 / PN 16)
|
RELATED PRODUCTS
2 /2 Way Pneumatic Single & Double Acting Angle Type On/Off Control Valve
Body : Aluminium / S.S.304
Actuator Type : Double Acting / Single Acting
Air Connection : 1/4″ BSP (NPT On Request)
Operating Pressure : 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4″)
Operating Cycles : 350 to 650 Cycles / Hr.
Model : SRT / ASV / SRK / TOF
Size Range : 1/2″ to 4″
Body : CF8 / CF8M / CF3M
Bonnet : CF8 / CF8M / CF3M
Pressure : up to 10 Bar
Temperature : up to 220°C
Leakage : As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight
End Connection : Screwed End / Flanged End
FMK Model K-05 Series
| Bore (mm) | 25 |
| Piston Rod | 10 |
| Stroke |
25mm to 1000mm (Up to 2000mm)
|
| Seals |
Buna-N / P.U. / Hi-Nitril (Viton on Request)
|
| Pressure | 0.5~10 kg/cm² |
| Temperature |
80°C / 100°C / 180°C Max.
|
| Tube |
Aluminium Hard Anodized
|
| End Cover |
Aluminium Pressure Die Cast
|
| Mounting |
Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)
|
Pilot Piston Steam & High Temperature Solenoid Valve
| Attribute | Details |
| Model | HVS |
| Body | CF8 / CF8M |
| Size Range | 1/4" to 4" |
| Piston |
S.S.304 / S.S.316
|
| Seat | Viton |
| Temperature | up to 180°C |
| Pressure | 0.5 to 12 Bar |
| Coil Voltage |
12V, 24V, 48V, 110V, 230V, AC/DC
|
| Coil Insulation |
"H" Class Suitable up to 180°C
|
| Coil Enclosure | IP 67 |
| Coil Rating |
Continuous Rated
|
| Media |
Hot Water, Steam, High Temperature Fluids
|
| Ends |
Screwed End / Flanged End 150 Class / Triclover End
|
Reviews
There are no reviews yet.