FMK Model K-05 Series
Inquiry Now
Product Description
| Bore (mm) | 25 |
| Piston Rod | 10 |
| Stroke |
25mm to 1000mm (Up to 2000mm)
|
| Seals |
Buna-N / P.U. / Hi-Nitril (Viton on Request)
|
| Pressure | 0.5~10 kg/cm² |
| Temperature |
80°C / 100°C / 180°C Max.
|
| Tube |
Aluminium Hard Anodized
|
| End Cover |
Aluminium Pressure Die Cast
|
| Mounting |
Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)
|
RELATED PRODUCTS
Diaphragm Solenoid Valve
Model : ISD
Body : CF8 / CF8M
Size Range : 1/4" to 6"
Diaphragm : Nitrile
Temperature : -5°C to 85°C (Up to 120°C On Request)
Pressure : 0.5 to 10 Bar
Valve Position : Normally Open / Normally Close
Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC
Coil Insulation : "F" Class
Coil Encloser : IP 67
Coil Rating : Continuous Rated
Media : Air, Water, Light oil, Gas Light Chemical
Ends : Screwed End / Flanged End 150 Class / Triclover End
Electrical Auto Drain Valve
| Model | ADF-695 |
| Body | IC SS |
| Connection Port | 1/2" (F) (BSP) |
| Mounting |
Indoor/Outdoor Better with cover Panel
|
| Coil Volt | 230v AC/DC |
| Critical Ambient Temperature | 20°C to 85°C |
| Humidity Condition |
less then 85%, IP 65
|
| Off Time | 0.5 to 45 Min. |
| On Time | 0.5 to 10 Sec. |
| Manual Override | Reset |
| Timer Body |
Electrical (Adjustable)
|
| Note |
Coil Volt 110v,24v, 12vAC/DC Available On Request
|
Pilot Piston Steam & High Temperature Solenoid Valve
| Attribute | Details |
| Model | HVS |
| Body | CF8 / CF8M |
| Size Range | 1/4" to 4" |
| Piston |
S.S.304 / S.S.316
|
| Seat | Viton |
| Temperature | up to 180°C |
| Pressure | 0.5 to 12 Bar |
| Coil Voltage |
12V, 24V, 48V, 110V, 230V, AC/DC
|
| Coil Insulation |
"H" Class Suitable up to 180°C
|
| Coil Enclosure | IP 67 |
| Coil Rating |
Continuous Rated
|
| Media |
Hot Water, Steam, High Temperature Fluids
|
| Ends |
Screwed End / Flanged End 150 Class / Triclover End
|
Reviews
There are no reviews yet.