Fr + L Sets 2pc With Pressure Gauge

Product Description

Categories: FRL, JH Series, Pneumatics

There are no reviews yet.

Be the first to review “Fr + L Sets 2pc With Pressure Gauge”

Model	2ADSS-3
Size	1/4”, 1/2”
Body	Aluminium Anodized
Seals	Nitrile
Pressure	1 to 10 Kg/Cm²
Temperature	5 to 55°C
Leakage	Bubble Tight
Media	Compressed Air (Filtered & Lubricated)
Coil Volt	12V, 24V, 48V, 110V, 230V, (AC / DC)
Duty Cycle	Continues Rated
Protection	IP 65 Class F
Connector	DIN 43650 B

Feature	Value
Model	AF-MD
Size	1/4", 3/8", 1/2"
Body	Aluminium Pressure Die Cast
Seals	Hi-Nitrile
Bowl	Polycarbonate (Metal Bowl Available)
Element	25 Micron
Pressure	Up to 10 Kg/cm²
Temperature	Up to 50°C
Media	Compressed Air

Model : ISD

Body : CF8 / CF8M

Size Range : 1/4" to 6"

Diaphragm : Nitrile

Temperature : -5°C to 85°C (Up to 120°C On Request)

Pressure : 0.5 to 10 Bar

Valve Position : Normally Open / Normally Close

Coil Voltage : 12V, 24V, 48V, 110V, 230V, AC/DC

Coil Insulation : "F" Class

Coil Encloser : IP 67

Coil Rating : Continuous Rated

Media : Air, Water, Light oil, Gas Light Chemical

Ends : Screwed End / Flanged End 150 Class / Triclover End

Bore (mm)	25
Piston Rod	10
Stroke	25mm to 1000mm (Up to 2000mm)
Seals	Buna-N / P.U. / Hi-Nitril (Viton on Request)
Pressure	0.5~10 kg/cm²
Temperature	80°C / 100°C / 180°C Max.
Tube	Aluminium Hard Anodized
End Cover	Aluminium Pressure Die Cast
Mounting	Eye Rod Mounting, Fork Mounting, Front & Rear Trunnion Mounting, Pivot Mounting, Center Lug Mounting, Pivot Bracket & Pin Mounting, Rod End Aligner Mounting, Foot Bracket Mounting, Swivel Flange, Fixed Center Trunnion Mounting, Center Trunnion Mounting (Adjustable)

Model : ECO
Body : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
Size Range : 1.1/2" to 48"
Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
Disc. : Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
Seat : Nitrile / EPDM / Viton / Hypelon / Neoprene
Seat Leakage : Tight Shut Off
Temprature : -20°C to 80°C (High Temperature available on Request)
Pressure rating : PN 10 / PN 16 ( PN 20 ON REQUEST)
End Connection : Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)