2 /2 Way Pneumatic Single & Double Acting Angle Type On/Off Control Valve
Body : Aluminium / S.S.304
Actuator Type : Double Acting / Single Acting
Air Connection : 1/4″ BSP (NPT On Request)
Operating Pressure : 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4″)
Operating Cycles : 350 to 650 Cycles / Hr.
Model : SRT / ASV / SRK / TOF
Size Range : 1/2″ to 4″
Body : CF8 / CF8M / CF3M
Bonnet : CF8 / CF8M / CF3M
Pressure : up to 10 Bar
Temperature : up to 220°C
Leakage : As per ANSI B 16, 16.104 Leakage Class VI Shut off tight / Bubble tight
End Connection : Screwed End / Flanged End
2/2 – 3/2 Way Pneumatic Diaphragm Thermic Fluid Modulating type Control Valve High Temperature
Actuator : Diaphragm Type Single Acting
Actuator Action : Air to Open / Air to Close
Air Fail Position : Closed / Open
Working Pressure : 2.5 to 3.5 Kg/cm²
Valve Details: Model
CND : Type of Valve
Globe Type 2/2 Way – 3/2 Way
Size Range : 1/2″ to 12″
Body : WCB / CF8 / CF8M / CF3M
Bonnet : WCB / CF8 / CF8M / CF3M
Seat : Metal to Metal
Trim / Plug : S.S.304 / 316
Pressure : up to 10 Bar
Temperature : up to 450°C
Leakage Class : Class IV As Per ASME B 16.104 CL For Metal to Metal Seating / FCI 70.2
End Connection : Flanged End As Per ASME B16.5 Class 150(300 Class & 600 Class available on Request)
3 piece design floating ball full /reduce port ball valve class 150/300
| BODY | ASTM A 351 Gr CF8 |
| BALL | AISI 304 | ASTM A 351 Gr CF8 |
| STEM | AISI 304 |
| SEAT & SEALS | PTFE |
| MFG STD | GENERALLY CONFORMING TO BS 5351 | ISO 17292 |
| TEST STD | BS 6755 |
| ENDS | FLANGED TO ASME B 16.5 (150#/300#) |
| HYD-TEST PRESSURE | BODY :1100 Psig (77 Kg/Cm ²) (150#) |
| PNEUMATIC TEST PRESSURE : | SEAT : 100 Psig (7 Kg/Cm ²) |
| SIZE RANGE | 15 MM TO 600 MM |
3/2 Way Single Solenoid Valve
| Model | 2ADSS-3 |
|---|---|
| Size | 1/4”, 1/2” |
| Body | Aluminium Anodized |
| Seals | Nitrile |
| Pressure | 1 to 10 Kg/Cm² |
| Temperature | 5 to 55°C |
| Leakage | Bubble Tight |
| Media | Compressed Air (Filtered & Lubricated) |
| Coil Volt | 12V, 24V, 48V, 110V, 230V, (AC / DC) |
| Duty Cycle | Continues Rated |
| Protection | IP 65 Class F |
| Connector | DIN 43650 B |
5/2 Way Solenoid Valve
| Model | 2ADSS-5 |
|---|---|
| Size | 1/4”, 1/2” |
| Body | Aluminium Anodized |
| Seals | Nitrile |
| Pressure | 1 to 10 Kg/Cm² |
| Temperature | 5 to 55°C |
| Leakage | Bubble Tight |
| Media | Compressed Air (Filtered & Lubricated) |
| Coil Volt | 12V, 24V, 48V, 110V, 230V, (AC / DC) |
| Duty Cycle | Continues Rated |
| Protection | IP 65 Class F |
| Connector | DIN 43650 B |
Actuator Ball valve
| Model | ECO |
| Body |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN
|
| Size Range | 1.1/2" to 48" |
| Shaft |
AISI 410 / AISI 304 / AISI 316 / AISI 316L
|
| Disc. |
Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN (S.G. Iron with Teflon / Teflon / Powder / Nylon Coated / & Rubber Line)
|
| Seat |
Nitrile / EPDM / Viton / Hypelon / Neoprene
|
| Seat Leakage | Tight Shut Off |
| Temprature |
-20°C to 80°C (High Temperature available on Request)
|
| Pressure rating |
PN 10 / PN 16 ( PN 20 ON REQUEST)
|
| End Connection |
Wafer Type Suit 150#, Table 'D', 'E' & IS 6392 Table 11 (PN 10 / PN 16)
|
